1.2.12 LEDs and Buttons
The LED and button locations on the OP (operations) panel are indicated below. (Open the
panel cover door to access the controls and LEDs.)
See the table on the following page for additional details.
ON/OFF Switch
USB Port
Label inside panel cover:
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
Overview
Revision 1.0 - March 6, 2012
Blue LED
power indicator
Volume Down
Volume Up
Brightness Down
Brightness Up
Reset Switch
HDD1/SSD1 Diagnostic
HDD2/SSD2 Diagnostic
Fan Diagnostic (all models except A100)
Memory Diagnostic
Unused
5V Standby
HDD/SDD Activity
Chapter 1 - Overview
AIO Peripherals - 11