Cod Cpu Activation; Cod Activation Log - Fujitsu SPARC Enterprise M4000 Features Manual

Type of Usable COD Permits and XCP Version
TABLE 1
COD Permits
Can also be used on other servers
Server-specific
* The COD permits for the M4000/M5000 servers cannot be installed on the M8000/M9000 servers, and vice
versa.
† If you are using XCP 1100 or earlier, each COD permit is assigned to a server's individual Chassis HostID and
cannot be installed on other servers.
X: Not supported.
S: Supported.
To order COD Hardware Activation Options or COD boards, contact your sales
representative.

COD CPU Activation

When you purchase a COD Hardware Activation Option, Fujitsu sends you a COD
permit, which includes a COD key in the form of text lines. You install that key into
the COD database, which then allows you to activate the number of COD CPUs
specified in your order. The COD database is stored in nonvolatile memory on the
Service Processor. Servers with multiple Service Processors support COD database
failover.
Note – The XCP 1101 firmware release introduces support for unlocked COD keys,
which are not assigned to a server's individual Chassis HostID. The new type of
COD keys include the word "UNLOCKED."
Any old-style keys in your COD database will continue to work, even when new-
style keys are also present.

COD Activation Log

To display the COD activation log, which contains a record of additions and
deletions of COD permits, use the showcodactivationhistory(8) command. See
the showcodactivationhistory(8) man page.
XCP 1100 or Earlier
* †
X
S
Capacity on Demand (COD) Administration
XCP 1101 or Later
S
S
3