Selected Channel Window - Yamaha Studio Manager Owner's Manual

Selected Channel Window

The Selected Channel window allows detailed editing of the currently selected channel. To open the
Selected Channel window, choose [Selected Channel] from the [Windows] menu.
There are six variations of the layout of the Selected Channel window, as follows:
• Input Channels (see below)
• Bus Outs (see
• Aux Sends (see
• Matrix Sends (see
• Stereo Outs (see
• Remote Channels (see
Note: You can open multiple Selected Channel windows. The second and subsequent open
windows will indicate "Locked" in the title, which means that you cannot open Library
windows from these windows. In addition, these windows will not reflect the following
edits:
• Channel selections made in the Layer window (via the SELECT button)
• Edits in the Surround Editor window
Input Channels
A B
G H
A CHANNEL SELECT, INPUT PATCH & LIBRARY section
Channels can be selected by clicking the Channel ID and selecting from the list that appears, or by
clicking the left and right Channel Select buttons. The long channel name is displayed below the Chan-
nel ID. To edit the name, click it and type. The INPUT PATCH parameter is used to select an input
source. To select an input, click the parameter and choose from the list that appears. The [LIBRARY]
button opens the Channel Library window.
B
GATE section
This section contains the Gate controls and display graph for the currently selected Input Channel.
The rotary controls are used to set the threshold, range, attack, decay, and hold. The GR meter indi-
cates the amount of gain reduction being applied by the Gate. The [ON] button turns the Gate on and
off. The [LINK] button links the Gate of the currently selected Input Channel with the Gate of its part-
ner channel. The KEY IN parameter is used to select a Gate trigger source. The [LIBRARY] button
opens the Gate Library window.
page 16)
page 17)
page 18)
page 19)
page 20)
C D E
I
Studio Manager for V2 DM2000 Editor—Owner's Manual
F
14