Table of Contents
Advertisement
Chapter 17 Setting Preferences for Your Handheld
To use a calling card:
1. Tap the Use calling card check box to select it.
Select this
box to use a
calling card
Enter your calling card number on the Use calling card line.
2.
NOTE
distance services. However, because MCI works differently, MCI customers
need to put the calling card number in the Phone # field and the phone number
in the Use calling card field.
TIP
number to compensate for the cue delay.
Tap OK.
3.
Connecting to your service
After you set your Connection and Network Preferences, establishing a connection
to your Internet Service Provider (ISP) or your company's network (dial-in server)
is easy.
NOTE
web browser or news reader, to take advantage of this connection. For information
about third-party applications that support TCP/IP , check the web site
www.palm.com.
To establish a connection:
Tap Connect to dial the current service and display the Service Connection
Progress messages.
To see expanded Service Connection Progress messages, press the lower half of
the Scroll button.
To close a connection:
Tap Disconnect to terminate the connection between your handheld and your
service.
Creating additional service templates
You can create additional service templates from scratch or by duplicating existing
templates and editing information. After you create a new or duplicate template,
you can add and edit settings.
186
The Phone Setup dialog box works correctly for AT&T and Sprint long-
It's a good idea to add at least three commas before your calling card
If you are connecting to an ISP , you need a third-party application, such as a
Enter your
calling card
number here
Advertisement
Table of Contents
