Download Print this page
Fujitsu FTP-622MCL101 Overview
Fujitsu FTP-622MCL101 Overview

Fujitsu FTP-622MCL101 Overview

24v drive, 2-color thermal printer 2” type mechanism

Advertisement

Quick Links

24V DRIVE, 2-COLOR THERMAL PRINTER
2" TYPE MECHANISM
FTP-622MCL101/102/353/354
OVERVIEW
New 2-color printer (blue/black or red/black) joins FTP-602
Series. The series consists of 24V battery drive compact thermal
printers which can print at high speed.
This series is suitable as built-in printer for a variety of
applications, such as portable terminals, POS terminals, ticket
machines, coupon machines, label printers, banking machines,
measuring devices, medical equipment, etc.
HIGHLIGHTS
• 2 Color printing
It can print 2 colors: blue/ black or red/black
• High speed printing
It can print at 100 mm/s (800 dotlines/s) by using Fujitsu
Components' unique head drive control (at monochromatic
printing).
Speed of 2-color printing:
• Auto Cutter
Printer with auto cutter (full cut/ partial cut) is available.
• Paper auto loading function
Thermal paper can be loaded without head-up lever
operation.
• Easy head access
It is designed for easy head cleaning and head replace-
ment.
• Two paper paths
Front and bottom paper insertion is available.
- blue and red: 80 mm/s (460
dotlines/s) maximum
- monochromatic print: 40mm/s
maximum
FTP-622MCL101
1

Advertisement

loading

Summary of Contents for Fujitsu FTP-622MCL101

  • Page 1 • 2 Color printing It can print 2 colors: blue/ black or red/black FTP-622MCL101 • High speed printing It can print at 100 mm/s (800 dotlines/s) by using Fujitsu Components' unique head drive control (at monochromatic printing). Speed of 2-color printing:...
  • Page 2: Part Numbers

    FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354 PART NUMBERS l e l l a i , c i ) i j l e l *1: FTP-622DCL411 is ANK supported only *2: FTP-622DSL438 has FLASH memory and can print high speed images *3: Supports Kanji and parallel and serial interfaces GENERAL SPECIFICATIONS Item Specifications...
  • Page 3 24 (H) mm Weight Printer Mechanism Approximately 81g Mechanism with cutter Approximately 280g Life Head Pulse durability: 1 pulse/dot (using Fujitsu Components' standard driving method) Wear resistance: 50 km (at 25% print ratio) Cutter 3x10 times minimum 5x10 times minimum Operating temperature...
  • Page 4 FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354 DIMENSIONS 1. Printer mechanism FTP-622MCL101/102 Unit: mm 2. Printer mechanism with cutter FTP-622MCL353/354 Ç ¢ Å B â ∫ Ç ≥ Ç ¢ Ç ≈ Ç Á Ç » … ê G ê n Ç à ” í ç Å...
  • Page 5 FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354 Interface board Unit: mm...
  • Page 6 FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354...
  • Page 7 FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354 CONNECTOR FOR THERMAL HEAD Head side : IL-FPC-28CLIP (JAE) Board side : 52045 (Molex) or equivalent *1: Symbol: " " means a negative logic signal Thermal head heat sink Head up level Motor 1, 2, 3, ........15, 16 Connector Pin No.
  • Page 8 FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354 FUNCTION ITEM ITEM Test printing Motor power save Paper-out detection Mark detection Paper near end detection MCU trouble detection Head-up detection Power on/off sequence protection Abnormal temp. of thermal head detection Motor protection Blown fuse detection Hardware timer Abnormal voltage detection of head...

This manual is also suitable for:

Ftp-622mcl102Ftp-622mcl353Ftp-622mcl354