Macintosh: Installing Finepixviewer - FujiFilm X-E1 Owner's Manual

Macintosh: Installing FinePixViewer

Macintosh: Installing FinePixViewer
1 Confi rm that the computer meets the following system requirements:
CPU CPU PowerPC or Intel (Core 2 Duo or better)
Pre-installed copies of Mac OS X version 10.5–10.6 (visit http://www.fujifilm.com/support/digital_cameras/
OS OS
compatibility/ for more information). Mac OS X version 10.7 and later not supported.
RAM RAM 256 MB or more (1 GB or more)
Free disk space A minimum of 200 MB required for installation with 400 MB available when FinePixViewer is running Free disk space
Video Video 800 × 600 pixels or more with thousands of colors or better
Other Other Built-in USB port recommended. Operation is not guaranteed with other USB ports.
* Recommended when displaying HD movies.
2
After starting the computer and quitting any applications that may be running, insert the installer
CD in a CD-ROM drive and double-click Installer for Mac OS X.
3
An installer dialog will be displayed; click Installing FinePixViewer to start installation. Enter an
administrator name and password when prompted and click OK, then follow the on-screen in-
structions to install FinePixViewer. Click Exit to quit the installer when installation is complete.
Viewing RAW Images Viewing RAW Images
RAW FILE CONVERTER software is required to view RAW images on a computer. To install RAW FILE
CONVERTER, double-click SILKYRFCEXInstaller. RAW FILE CONVERTER is supported under Mac OS X ver-
sions 10.5 to 10.7.
4
Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD
if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry
location out of direct sunlight in case you need to re-install the software.
*
*
Viewing Pictures on a Computer
89