To Calibrate The Compass - Freestyle Nomad Manual

2. Press S1/S2 button to select declination angle setting
mode. The message "DECLIN" will be displayed.
3. Press S3 button, E will blink.
4. Press S1/S2 button to toggle between E (East) & W(West).
5. Press S3 button. The declination angle will blink.
6. Press S1/S2 to set the degree from 0˚ to 90˚.
7. After finish making all the settings, press S4 button to
return to COMPASS mode.

TO CALIBRATE THE COMPASS

1. In COMPASS mode, press and hold S4 for around 3
seconds. The message "CALIB" will be displayed.
2. Press S3 button to start the calibration.
3. When the message "2-TURN" is displayed, a series of
moving dots will be displayed at the rim of the display
and increase in clockwise direction. Rotate the watch
horizontally in counter-clockwise direction in order to
freeze the last moving blinking dot to stay at 12- hour
position.
4. When the watch is rotated completely for 360 degrees,
the message "1-TURN" will be displayed. Rotate the
watch again in counter-clockwise direction.
5. To interrupt and stop the calibration,
press S4 button. The message "DISTORT" will be dis
played and the watch will return to COMPASS
mode after 3 seconds.
6. When the calibration is done, the message "DONE" will
be displayed and the watch will return to COMPASS
mode after 2 seconds.
TO TAKE A NEW "MARK ANGLE"
In COMPASS mode, You must move your watch horizontally
8