Canon XA20 Instruction Manual page 146

Appendix: Menu Options Lists
[Data Code]:
Displays the date and/or time when the scene or photo was recorded.
[( Camera Data]: Displays the aperture (f-stop) and shutter speed used when recording the scene
or photo.
[TV Type]: When you connect the camcorder to a TV using the supplied STV-250N Stereo Video Cable,
select the setting according to the type of TV in order to display the picture in full and in the correct
aspect ratio.
[+ 4:3 TV]: TV sets with 4:3 aspect ratio.
146
[, Wide TV]: TV sets with 16:9 aspect ratio.
• When the TV type is set to [+ 4:3 TV], during the playback of video originally recorded with an
aspect ratio of 16:9, the picture will not be displayed fullscreen.
Recording Setup
Menu item
[Movie Format]
[Recording
Mode]
[Recording
Media]
[Dual/Relay
Recording]
[Frame Rate]
[Slow & Fast
Motion]
[Video Snapshot
Length]
[Time Code
Mode]
[Time Code
Running Mode]
[DF/NDF]
Setting options
[· AVCHD], [¸ MP4]
For AVCHD movies:
[28 Mbps LPCM (59.94P)], [28 Mbps (59.94P)],
[24 Mbps LPCM], [24 Mbps], [17 Mbps], [5 Mbps]
For MP4 movies:
[35 Mbps (59.94P)], [24 Mbps], [17 Mbps], [4 Mbps],
[3 Mbps]
[v Rec Media for Movies]:
[6 Mem. Card A], [7 Mem. Card B]
[{ Rec Media for Photos]:
[6 Mem. Card A], [7 Mem. Card B]
[Standard Recording], [Dual Recording], [Relay Recording]
For AVCHD movies:
[ 59.94i], [ PF29.97], [
For MP4 movies:
[ 29.97P], [ 23.98P]
When [Recording Mode] is set to [35 Mbps (59.94P)]:
[j Off], [ 29.97P], [
When [Recording Mode] is set to [24 Mbps] or [17 Mbps] and
[Frame Rate] is set to [
[j Off], [ 59.94P], [
When [Recording Mode] is set to [24 Mbps] or [17 Mbps] and
[Frame Rate] is set to [
[j Off], [ 59.94P], [
[C 2 sec], [D 4 sec], [F 8 sec]
[ Preset], [ Regen.]
[ Rec Run], [
[ DF], [ NDF]
23.98P]
23.98P]
29.97P]:
23.98P]
23.98P]:
29.97P]
Free Run]
A
y }
– – 39
– – 47
– – 39
– – 49
– – 50
– – 51
– – 91
– – 76
– – 76
– – 77