Technical Support (Faq) - AOC 9KLR User Manual

Problem
Power LED is not ON
No Plug & Play
Picture is fuzzy
Picture bounces or a wave
pattern is present in the
picture
Power LED is ON (green or
orange light is ON) but
there is no video or picture.
Missing one of the primary
colors (RED, GREEN, or
BLUE)
Screen image is not
centered or sized properly
Picture has color defects
(white doesn't look white)
AOC 9KLR

Technical Support (FAQ)

• Make sure the power cord is properly connected to a grounded power
outlet and to the monitor.
• Confirm that your computer is Plug & Play compatible.
• Confirm that your video card is Plug & Play compatible.
• Inspect the video cable and make sure that none of the pins are bent.
• Make sure the AOC monitor drivers are installed
(AOC monitor drivers are available at: www.aocmonitor.com)
• Adjust the Contrast and Brightness settings.
• Move electrical devices away from the monitor. They may be causing
electrical interference.
• Press a key on the keyboard or wiggle the mouse to re-activate the
monitor.
• Make sure the video cable is properly connected to the computer.
• Inspect the video cable and make sure none of the pins are bent.
• Make sure your computer is operating correctly by pressing the CAPS
LOCK key and observing whether the CAPS LOCK light turns ON or
OFF.
• Inspect the video cable and make sure that none of the pins are bent.
• Make sure the video cable is properly connected to the computer.
• Adjust the Horizontal, Vertical or Zoom settings in the OSD window.
• Adjust the User Color setting in the OSD window.
Possible Solution
11
AOC 9KLR
v3_123102