c. Align the small triangle
microprocessor retainer. Lower the socket cover straight down to the microprocessor socket, and
then press it down until it snaps into position.
Figure 103. Installing the microprocessor socket cover
24. Note the orientation of the two system fan cages and carefully place them into the chassis. Then,
press the two system fan cages straight down until they are securely seated in the chassis. After that
connect the system fan cables to the system board.
Figure 104. Installing the two system fan cages with the system fans
25. Install other parts and connect all cables that you removed from the old system board to the new
system board. Refer to the information that you have noted down and the related topics in "Installing,
removing, or replacing hardware" on page 65.
26. If you are instructed to return the old system board, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to "Completing the parts replacement" on page 139.
Completing the parts replacement
This topic provides instructions to help you complete the parts replacement and turn on your server.
1
of the microprocessor socket cover with the small triangle
PS
U
Me
m
CP
U
.
Chapter 6
Installing, removing, or replacing hardware
2
on the
139