Inset Distance For Underlay - Brother BES Monogramming Suite Instruction Manual

4 In the Stitch Length box, enter the stitch length that you want
for your underlay stitches.
5 Adjust any of the other settings. Refer to the related
procedures for more information.
6 Click Apply.

Inset Distance for Underlay

You can change the inset distance. Pacesetter calculates the
inset distance (the distance the underlay stitches are placed
from the edge of the top stitching.)
Inset distance changes the amount of underlay coverage. The
smaller the inset distance, the more coverage you have.
To change the inset distance:
1 Select the monogram segment.
2 In the Properties Panel, scroll down to the Underlay area.
3 Select one or more of the following underlay types you want
to use: Contour, Perpendicular, Parallel, or Zig-Zag
When you select underlay types, you will be able to see what
your underlay type will look like in the Preview area.
4 In the Inset box, enter the amount of distance you want.
Enter a zero value if you want to place the underlay directly
on the edge of the monogram segment.
5 Click Apply.
Editing Designs 65