Reflecting A Design Object; Aligning Parts Of The Design - Brother BES Monogramming Suite Instruction Manual

Reflecting a Design Object

Reflecting an object flips the object across an invisible axis. You
can choose either a vertical or horizontal axis to reflect across.
To reflect segments:
1 Select the segment(s) you want to reflect.
2 From the arrange tool bar, click one of the following:
 Click the Flip Vertical
vertically.
 Click the Flip Horizontal
horizontally.
On the left, the original design object; on the right, the same object copied,
and then reflected with the Horizontal Flip tool.

Aligning parts of the Design

You can align lettering or objects horizontally or vertically. You
can use this feature to precisely align any objects of a design.
To align segments:
1 Select the segments you want to align.
2 From the Arrange tab on the Ribbon, click any of the
following:
Editing Designs 55
tool to flip selected objects
tool to flip selected objects