Table of Contents
Advertisement
56x
Getting Started
Cable Connections (568 Only)
To connect the USB and Thermocouple to the 568, see Figure 4.
Figure 4. Connecting the K-Type Thermocouple, USB Cable
To prevent incorrect readings, do not perform a
temperature measurement of an earthed conductor while
the 568 is connected to a PC that is earthed by a three-
phase grounding plug.
561 Display
The primary temperature display reports the current or last IR
temperature read until the 7-second hold time elapses.
The secondary temperature display reports current
thermocouple temperature when a type-K thermocouple is
attached. See Figure 5.
6
(568 Only)
Note
ewm05.eps
Advertisement
Table of Contents
