NEC Versa P520 Disassembly Manual page 27

6. To remove the latch spring do as shown in Fig 47.
Fig. 47: Removing the latch spring
7. Remove on both side of the bottom cover of the LCD the 6 screws (4) in order to extract
the bare LCD as shown below.
(4)=M2x3
Fig. 48: Removing the screws retaining the LCD
8. Remove also the screws (10) and (16) as shown in the following picture.
(10)=M2.3x4.5
(16)=M2x4
Fig. 49: Removing hinges and inverter screws
NEC Versa P520 Disassembly Manual Page 27