Table of Contents
Advertisement
The motherboard provides the following jumpers for you to set the computer's function.
This section will explain how to change your motherboard's function through the use
of jumpers.
Clear CMOS Jumper: JBAT1
There is a CMOS RAM on board that has a power supply from external battery to keep
the data of system configuration. With the CMOS RAM, the system can automatically
boot OS every time it is turned on. If you want to clear the system configuration, use
the JBAT1 (Clear CMOS Jumper ) to clear data.
MSI Reminds You...
You can clear CMOS by shorting 2-3 pin while the system is off. Then
return to 1-2 pin position. Avoid clearing the CMOS while the system is
on; it will damage the mainboard.
Jumper
1
JBAT1
Keep Data
Hardware Setup
1
1
3
3
Clear Data
2-23
Advertisement
Table of Contents
