Panasonic PT-DS20KU Operating Instructions Manual page 17

▶
z Make a clearance of at least 5 mm (0.2") between the projector bottom and setting surface by inserting
spacers (metallic) etc. between them.
▶
z The adjustable feet can be removed if not needed in the installation. However, do not use the screw holes
where the adjustable feet was removed to fix the projector in place.
Also, do not install other screws not specified in the instruction manuals of accessories in the adjustable
feet's screw holes.
Doing so may damage the set.
▶
z Use the adjustable feet only for the floor standing installation and for adjusting the angle. Using it for other
purposes may damage the set.
▶
z Do not stack projectors on top of each other.
▶
z Do not use the projector tilted at an angle that
exceeds ±15° from the horizontal plane.
▶
z Prevent hot and cool air from the air
conditioning system to blow directly to the
ventilation ports (intake and exhaust) of the
projector.
▶
z Do not block the ventilation ports (intake and
exhaust) of the projector.
Precautions for use
ENGLISH - 17