Advertisement
Assembled Parts
CAUTION
This package contains small parts in an
unassembled state. Adult assembly is required.
Take extra care during unpacking and assembly.
Front Brace
Support Bar
tray
M3,5 x 15mm Screw - 8
Both Shown Actual Size
Note: Tighten and loosen all screws with a Phillips
screwdriver. Do not over-tighten.
Back Brace
Seat
2 Frames
M4,5 x 18mm
Washer Head Screw - 4
Front Brace
1
• Fit the front brace onto one of the frames.
Hint: The front brace will only fit on the frame one way. If it does
not seem to fit, turn it around and try again!
• Insert two M3,5 x 15mm screws into the holes in the frame
and tighten.
1
6
• Turn the seat face down. Insert two M3,5 x 15mm screws into the
seat and tighten.
Frame
BACK VIEW
Advertisement
