Craftsman 917.28925 Operator's Manual page 22

3. ATTACH MOWER SIDE SUSPENSION
ARMS (A} TO CHASSIS - Position hole
in arm over pm (B) on outside of tractor
chassis and secure with retainer spring.
4. Repeat on opposrte side of tractor.
ATTACH REAR LIFT LINKS (C) - L_ft
rear corner of mower and position slot
in link assembly over pin (D) on rear
mower bracket and secure with washer
and retainer spring.
7. Insert end of link (E) into hole in front
mower bracket (H) and secure with
washer and retainer spring (J).
_:a;?_, _,a__ -. i-_._ -_ , , - -_ ->%;@,,-
8. Hook end of clutch cable spnng (Q) into
hole _n _dfer arm (R).
9. Push clutch cable housing guide (P) Into
bracket, slide collar (L) onto guide and
secure with retainer spring (K).
I 0, Install belt onto engine pulley (M) and belt
keepers (G),
6. ATTACH FRONT LINK (E) - Work from
left side of tractor. Insert rod end of link
assembly through front hole In tractor
front suspension bracket (F).
%
IMPORTANT: Check belt for proper routing
=naf! mower pulley grooves.
11.Ra=se attachment lift lever to h_ghest
position.
12. If necessary, adjust gauge wheels before
operating mower as shown in the O pera-
_on section of this manual.
¢
03042rex
22