Enabling And Disabling Vlans; Updating Vlan Config Window Information; Performing Ingress List Configuration - Enterasys 2000 User Manual

The SmartSwitch 2000 Chassis View

Enabling and Disabling VLANs

Unless Enable is selected when a VLAN is initially defined, it is disabled by default. A
new VLAN that is left in a Disabled state will remain disabled until a port is assigned to
NOTE
it, at which time it will be automatically enabled. If you are changing a VLAN's port
assignment, the VLAN should be disabled before changing the port configuration. See
Performing Ingress List
VLAN port configuration.
1. Select the desired VLAN entry in the Configured VLANS list box.
2. In the VLAN Admin field, click to select Enable or Disable.
3. Click the Apply button. The selected VLAN will be enabled or disabled,

Updating VLAN Config Window Information

Clicking the Refresh button will update the information displayed in the
Configured VLANs list without closing the window.

Performing Ingress List Configuration

802.1Q VLAN port assignment and ingress list configuration operations are
performed using the VLAN Port Config window, which is accessed from the
Device menu in your switch's Device View. See
page 2-58
1. Click on Device in the Chassis View menu bar to display the Device menu.
2. Click on 802.1Q VLAN, and then select 802.1Q VLAN Port Config. The
2-62
Configuration, on
depending on your selection.
for details on ingress lists. To launch the window:
VLAN Port Config window,
page 2-62, for details on completing your
Ingress List
Figure 2-23, opens.
Operation, on
Managing the Hub