Craftsman 315.271810 Owner's Manual page 6

Blade Diameter
Blade Arbor
Cutting Depth at 0 ° Bevel Cut
Cutting Depth at 45 ° Bevel Cut
5-1/2 in. (140 mm) No Load Speed 4,000 RPM
3/8 in. (10 mm) Motor - 18 Volts DC
1-9/16 in. (40 ram) Charge Rate 1 Hour
1-1/8 in. (29 ram) Charger Rating 120 volts, 60 Hz, AC
Your trim saw has been shipped completely
assembled except for the blade. Inspect it carefully to
make sure no breakage or damage has occurred
duringshipping. If any parts are damaged or missing,
contact your nearest Sears Retail Store to obtain
replacement parts before attempting to operate saw. A
blade, blade wrench, and this owners manual are also
included.
WARNING: If any parts are missing, do not
operate this tool until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
The following recommended accessories are currently available at Sears Retail Stores.
II 5-1/2 in. Thin Kerf Blade
_1_ WARNING:
The use of attachments or accessories not listed might be hazardous.
6