Table of Contents
Advertisement
2
Unpacking the
Ethernet Adapter
I
NSTALLING THE
A
DAPTER
This chapter contains the information you need to install and set up the
Ethernet Adapter. It covers the following topics:
Unpacking the Ethernet Adapter
Observing Safety Precautions
Deciding Where to Place the Ethernet Adapter
Connecting the Ethernet Adapter
Checking the LED Indicators
Attaching An External Antenna
Determining if you Need to Configure the Ethernet Adapter
Using the Enterasys Networks Installation CD
Make sure that you have the following items, which are included with the
Ethernet Adapter:
Power adapter and power cord.
Standard Category 5 unshielded twisted pair (UTP) Ethernet cable.
Rubber feet (four; used for a flat-surface installation).
Enterasys Networks Installation CD.
For wall-mounting installations, you need the following items, which
are not included with the Ethernet Adapter:
Mounting screws.
Plastic anchors (for drywall mounting).
E
THERNET
Advertisement
Table of Contents
