Gigabyte GV-R80P256D User Manual page 28

Display Properties:
If your VGA card is equipped with a S-Video connector, you can use a second output device
(e.q. a TV or a computer monitor) as part of your operating desktop extending your desktop
to second device or copying your desktop on the second device.
Connecting your graphics card to a TV or VCR
To connect your GV-R80P256D/ GV-R80P256V graphics card to a TV (or VCR), use an S-Video
cable. However, most TVs (and VCRs) have a Composite video input, in which case you can use
the supplied
S-Video-to-Composite video adapter.
1. Turn off your computer and your television (or VCR).
2. Ensure your graphics card was installed correctly. (For information about placing the card in your
computer and installing the enhanced graphics driver, see the user's manual.)
3. Determine if your television (or VCR) has an S-Video or Composite video connection.
4. Looking at the back of your computer, locate your S-Video Out. Using an S-Video cable or the
supplied adapter cable, attach one end of the cable to your graphics card and the other to your
television (or VCR).
5. Turn on your television (or VCR) then your computer.
GV-R80P256D(V) Graphics Accelerator
Select Display Type
Enable / Disable "Extend my windows
desktop onto this monitor"
The Display tab provides the multi monitor features. Here
you can enable/disable display devices and swap the
assignment of Primary and Secondary displays.
- 28 -