Craftsman 172.108510 Owner's Manual page 10

ADDITIONALRULESFORSAFE OPERATIONcont.
z_ WARNING:
Some dust particles created by power sanding,
sawing, grinding, drilling and other construction jobs contains
chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products.
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending upon how often you do
this type of work. To reduce your exposure to these chemicals:
• Work in a well-ventilated area.
• Work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.
The label on your tool may include the following symbols.
V ..................................................... Volts
A .................................................... Amperes
Hz .................................................. Hertz
W ................................................... Watts
min ................................................ Minutes
.................................................. Altemating current
................................................. Direct current
no .................................................. No-load speed
[] .................................................. Class II construction
.../min ............................................ Revolutions or Strokes per minute
Z_ ................................................ Indicates danqer warning or caution.
It means attention! Your safety is invo ved.
IMPORTANT! READ ALL INSTRUCTIONS
Input
Blade Diameter
Blade Arbor
Cutting Depth at 90
Cutting Depth at 45
Rating
11 Amps 12 Amps
7 1/4 in. 184mm
5/8-in. (16mrr
27/16in. 61.97mm
113/16in. 47.24mrn
120 volts,60 Hz AC
10