USING SYSTEM
MENUS
Audio
options
Figure
11
Preview of audio features
How to make
changes
Making adjustments to system properties in this menu is similar to changing the settings for a
source.
• Move around and make choices by using the selection buttons shown.
• Move right to see a preview of features under each property.
• Press the down arrow or Entertoselect and activate that property screen.
Note, When activated, the screen changes from a preview of features to a list of the specific
options you may choose to alter for that property.
• In the active list, press the left, right, up, or down arrows to get to the option you want.
• Press Enterorthe left arrow button to confirm your selection and move back to the features
column.
• Repeat these steps for each change you want to make.
• Press Exit t o leave the System menu.
Press System o n the LIFESTYLE ®remote control. When you see a preview of audio features,
you can press the Enter b utton to move into the active list of audio options.
Note- Listening to an audio source while you make these adjustments can be helpful. Some
changes will be immediately noticeable and therefore useful in fine-tuning your selections.
Default settings
Active list of options
(Options)
Effect of this setting
Bass Compensation
0 Normal low-frequency
reproduction.
(-14 to +14) Decreased (-) or increased (+) low-frequency
reproduction.
(-9 to +6) Range available following ADAPTiQ®system calibration.
Treble Compensation
0 Normal high-frequency
reproduction.
-14 to +14 Decreased (-) or increased (+) high-frequency
reproduction.
(-9 to +6) Range available following ADAPTiQ system calibration.
28