Sony STR-DN1040 Operating Instructions Manual page 89

Operating the receiver
from zone 2
The following operations are described for
connecting an IR repeater and operating the
receiver in zone 2. When an IR repeater is
not connected, use this receiver in the main
zone.
ZONE
Input
buttons
1
Turn on the main receiver (this
receiver).
2
Turn on the receiver in zone 2.
3
Press ZONE.
The remote control switches to zone 2.
4
Press ?/1.
The zone function is activated.
5
Press the input buttons to select
the source you want.
6
Adjust to a suitable volume using
the receiver in zone 2.
Available zone 2 operations
INPUT
BD
DVD
GAME
2)
SAT/CATV
2)
VIDEO 1
VIDEO 2
INPUT
VIDEO 3
TV
SA-CD/CD
TUNER
BLUETOOTH
USB
HOME NETWORK
?/1
SEN
AV ?/1
SOURCE
1)
For zone 2, only analog audio signals are
output.
2)
Only when SOURCE is selected, the signals of
SOURCE
the current input in main zone are output.
3)
You can select either "FM" or "AM" from the
main zone and zone 2. Priority is given to the
choice which has most recently been selected,
even if a different choice has already been
selected in one of the zones.
To exit the zone 2 operation
Press ZONE, then press ?/1.
Tips
• Even when this receiver is in standby mode
(press ?/1 on the remote control to turned off
this receiver), the receiver in zone 2 remains
turned on.
• When the receiver is in standby mode, the ?/1
(on/standby) indicator on the front panel lights
up in amber if the receiver in zone 2 is turned on.
• AirPlay function is available in main zone only.
1)
ZONE 2
–
–
–
a
a
–
3)
1)
ZONE 2
–
–
a
a
–
–
–
–
a
89
US