Other Operations; Switching Between Digital And Analog Audio; Mode); Using Other Video/Audio Input Jacks (Input Assign) - Sony STR-DN1040 Operating Instructions Manual

Other Operations

Switching between
digital and analog audio

(INPUT MODE)

When you connect equipment to both
digital and analog audio input jacks on the
receiver, you can fix the audio input mode
to either of them, or switch from one to the
other, depending on the type of material
you intend to watch.
1
Press the input buttons to select
the input.
You can also turn INPUT SELECTOR
on the receiver.
2
Press INPUT MODE.
The selected audio input mode appears
on the display panel.
• AUTO: Gives priority to digital
audio signals. If there are more than
one digital connection, HDMI audio
signals have priority.
If there are no digital audio signals,
analog audio signals are selected.
When TV input is selected, priority
is given to the Audio Return
Channel (ARC) signals. If your TV
is not compatible with the ARC
function, the digital optical audio
signals are selected.
If the Control for HDMI functions of
both the receiver and the TV are not
activated, the ARC does not work.
• COAX: Specifies the digital audio
signals input to the COAXIAL jack.
• OPT: Specifies the digital audio
signals input to the OPTICAL jack.
• ANALOG: Specifies the analog
audio signals input to the AUDIO IN
(L/R) jacks.
86
US
Notes
• Based on the input, "------" appears on the
display panel, and other modes cannot be
selected.
• When "2ch Analog Direct" is being used, audio
input is set to "ANALOG". You cannot select
other modes.
Using other video/audio
input jacks
(Input Assign)
You can reassign video and/or audio
signals to another input jacks.
After you have reassigned the input jacks,
you can use the input button (or INPUT
SELECTOR on the receiver) to select the
equipment you connected.
Component video and
digital audio input
assign
You can reassign the COMPONENT
VIDEO and DIGITAL input jacks to other
input if the default settings of the jacks do
not correspond to your connected
equipment.
Example:
When you connect the DVD player to the
OPTICAL IN 1 (SAT/CATV) and
COMPONENT VIDEO IN 1 (SAT/CATV)
jacks.
– Assign the OPTICAL IN 1 (SAT/CATV)
jack to "DVD".
– Assign the COMPONENT VIDEO IN 1
(SAT/CATV) jacks to "DVD".
1
Select "Settings" from the home
menu, then press
The Settings menu list appears on the
TV screen.
2
Select "Input", then press
.
.