Pointer Up Command; Pointer Down Command; Enter Command; Freeze On Command - Sanyo PLC-XC56 - 3100 Manual

PLC-XC56 Basic Serial Command Specifications

6.46. POINTER UP Command

Command "C3C" [CR]
Move up the Pointer of On-Screen Display Menu.
Detail
This command works the same way as the pointer "▲" of the projector.
Acceptable
Response
Unacceptable

6.47. POINTER DOWN Command

Command "C3D" [CR]
Move down the Pointer of On-Screen Display Menu.
Detail
This command works the same way as the pointer "▼" of the projector.
Acceptable
Response
Unacceptable

6.48. ENTER Command

Command "C3F" [CR]
This command works the same way as "SELECT" button of the projector and
Detail
remote control.
Acceptable
Response
Unacceptable

6.49. FREEZE ON Command

Command "C43" [CR]
Freeze on-screen image.
Detail This command works the same way as "FREEZE" button of the remote control for
Freeze ON, but does not work for Freeze OFF.
Acceptable
Response
Unacceptable

6.50. FREEZE OFF Command

Command "C44" [CR]
Cancel Freeze mode.
Detail This command works the same way as "FREEZE" button of the remote control for
Freeze OFF, but does not work for Freeze ON.
Acceptable
Response
Unacceptable

6.51. Computer 1 Analog RGB Command

Command "C50" [CR]
Select Analog RGB input in Computer 1.
Detail Although projector returns "OK", Input search is not executed with this command
while Input search is set to On1 or On2,
Acceptable
Response
Unacceptable
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
17/23