Hp Device Toolbox; Figure 2-15 Ip Address Location On The Configuration Page - HP LaserJet Pro 400 Reference

The software checks the e-labels on the toner cartridges and displays the results.
●
By default the software checks every 60 minutes, but can be changed on the Settings tab.
●
The correct versions of software, firmware, e-labels, and an active internet connection are
required for HP Toner Authentication to work properly.

HP Device Toolbox

The HP Device Toolbox allows users to control settings on the product through a Web browser.
To access the HP Device Toolbox, complete one of the following procedures:
●
Click the Windows Start button, click the Programs or All Programs item, click the HP item,
click the product group, and then click the HP Device Toolbox item.
●
On network-connected products, you can open a Web browser and type the product IP address
in the address bar.
The product IP address displays on the product control panel. If that feature is disabled, the IP
address is documented on a configuration page. Print a configuration page by following these steps
on the product control panel.
1. Use the arrow buttons to select the Reports menu, and then press the
2. Use the arrow buttons to highlight the Config Report option, and then press the
3. Find the IP address on the configuration page.
Figure 2-15
HP LJ300-400 COLOR M351-M451 PCL
Config Report
Product Name
Formatted Number
Serial Number
Service ID
Firmware Date
Smart Install SW Version
Location
Device Location
ADF Installed
Max Monochrome Print Quality = 600x8
Max Color Print Quality
Controller Number
Memory
Total Memory
Available Memory
The following tabs are available in the HP Device Toolbox:
●
Status tab
●
System tab
●
Print tab
●
Networking tab
●
HP Web Services tab
ENWW
IP address location on the configuration page
Product Settings
= HP LJ300-400 Device Description = HP LJ300-400
Color M351-M451
Color M351-M451
= RN000Q1 Language = English
= CN18BC190F Asset Number =
Company Name =
= 20349
= 20101201 Contact Person =
= 10/27/2010.1.0.10301.31 Product Security = Off
HP Smart Install = Enabled
= USA
= Wired HW Address = XX:XX:XX:XX:XX:XX
Wireless HW Address = XX:XX:XX:XX:XX:XX
= Yes
Network In Use = None
= ImageREt 3600 Host Name = XXXXXXXXX
IPv4 Status = Network Cable Disconnected
= 38
IPv6 Status = Network Cable Disconnected
Show IP Address = Enabled
Installed Personalities and Options
= 128 MBytes PCL6 = (20040201)
= 56.45 MBytes URF = (20040201)
PCL = (20040201)
PDF = (20040201)
PS = (20040201)
HP LaserJet software components for Windows
OK button.
OK button.
69