Samsung PLH403W - PLH - 403W Instruction Manual page 52

Sp eci a l Feat ur e s
Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
50
Press the MENU button on the
1
remote, to display the on-screen
menu. Press CH
Press VOL + to display the PIP menu.
2
Press CH
Press VOL – or VOL + to select an
3
external signal. You can choose
between "Ant.," "Video 1," "Video
2," "Video 3," or "S-VHS 1,2."
The signal from these inputs will not
appear if you have not connected
any equipment to the TV's input
PIP
jacks.
For more information about external
MENU
signals, see "Viewing a VCR, DVD or
Camcorder Tape" on page 37. If
you select "Ant." the PIP image is the
CH/VOL
same as the main image.
NOTE
When an external signal is selected in the PIP mode,
COMPONENT is not selected. If you turn TV off while watching
and turn it on again, then the mode will return to Normal view.
Changing the Picture-in-Picture Channel
After you set the PIP signal source (antenna or cable), it is easy to
PIP CH
change channels.
Press the PIP CH
1
change the channel of the PIP image.
The PIP channel will appear in the
2
upper right corner of the screen,
above the main image.
to highlight PIP.
to select "TV/Video".
or CH to