Specifications; General Safety Precautions - Makita LS1013 Instruction Manual

ENGLISH

SPECIFICATIONS

Model .................................................................................................................LS1013 /LS1013F/ LS1013L/LS1013FL
Blade diameter............................................................................................................................................ 255 mm (10")
Hole diameter.......................................................................................................................................... 15.88 mm (5/8")
Max. Cutting capacities (H x W)
Miter angle
0°
45°
52° (right)
No load speed (RPM) ...................................................................................................................................... 3,700/min.
Laser Type (LS1013L, LS1013FL only) ..........................Wavelength 650 nm, Maximum output < 1mW (Laser Class II)
Dimensions (L x W x H) ................................................................. LS1013/LS1013F.......715 mm x 520 mm x 625 mm
Net weight .........................................................................................................LS1013/LS1013F.......21.0 kg (46.3 lbs)
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
For Your Own Safety Read Instruc-
tion Manual Before Operating Tool
Save it for future reference

GENERAL SAFETY PRECAUTIONS

(For All Tools)
1. KNOW YOUR POWER TOOL. Read the owner's
manual carefully. Learn the tool's applications
and limitations, as well as the specific potential
hazards peculiar to it.
2. KEEP GUARDS IN PLACE and in working order.
3. REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and
adjusting wrenches are removed from tool
before turning it on.
4. KEEP WORK AREA CLEAN. Cluttered areas and
benches invite accidents.
5. DON'T USE IN DANGEROUS ENVIRONMENT.
Don't use power tools in damp or wet locations,
or expose them to rain. Keep work area well
45° (left)
50 mm x 305 mm
(2" x 12")
(left) 50 mm x 200 mm
(2" x 7-7/8")
(right) 50 mm x 215 mm
(2" x 8-1/2")
-
USA007-2
Bevel angle
0°
91 mm x 305 mm
(3-5/8" x 12")
91 mm x 215 mm
(3-5/8" x 8-1/2")
91 mm x 185 mm
(3-5/8" x 7-1/4")
LS1013L/LS1013FL.......715 mm x 520 mm x 640 mm
LS1013L/LS1013FL.......22.0 kg(48.5 lbs)
lighted. Don't use tool in presence of flammable
liquids or gases.
6. KEEP CHILDREN AWAY. All visitors should be
kept safe distance from work area.
7. MAKE WORKSHOP KID PROOF with padlocks,
master switches, or by removing starter keys.
8. DON'T FORCE TOOL. It will do the job better and
safer at the rate for which it was designed.
9. USE RIGHT TOOL. Don't force tool or attachment
to do a job for which it was not designed.
10. WEAR PROPER APPAREL. Do not wear loose
clothing, gloves, neckties, rings, bracelets, or
other jewelry which may get caught in moving
parts. Nonslip footwear is recommended. Wear
protective hair covering to contain long hair.
11. ALWAYS USE SAFETY GLASSES. Also use face
or dust mask if cutting operation is dusty. Every-
day eyeglasses only have impact resistant
lenses, they are NOT safety glasses.
12. SECURE WORK. Use clamps or a vise to hold
work when practical. It's safer than using your
hand and it frees both hands to operate tool.
2
45° (right)
31 mm x 305 mm
(1-1/4" x 12")
31 mm x 215 mm
(1-1/4" x 8-1/2")
-
(28" x 20-1/2" x 24-5/8")
(28" x 20-1/2" x 25-1/4")