126
EXTERNAL
CONTROL
DEVICE
SETUP
EXTERNAL
CONTROL
DEVICE
SETUP
RS-232C
Setup
Connect the RS-232C (serial port) input jack to
an external control device (such as a computer
or
an A/V control system) to control the product's
functions externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
--
NOTE
• RS-232C on this TV is intended to be used
with third party RS-232C control hardware
and software. The instructions
below
are provided to help with programming
software or to test functionality
using telenet
software.
RS-232C connection cables are not
supplied with the product.
Type of connector;
D-Sub
9-Pin
Male
@
@
RS-232C IN
(CONTROL & SERVICE)
No,
1
2
3
4
5
6
7
8
9
Pin name
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection