LG 42LV3700 Owner's Manual page 33

MAKING CONNECTIONS
111
SIMPLINK Connection
Use the TV remote control to play and control the
AV device connected with the HDMI cable through
HDMI-CEC. This TV may work with the devices
that support HDMI-CEC, but only devices with the
_impLInK
logo are fully supported.
Connect one end of the HDMI cable to the HDMI/
DVI IN or HDMI IN terminal on the rear of the TV
and the other end to the SIMPLINK device.
- @ NOTE
* If the connected device does not support
HDMI-CEC, the SIMPLINK feature is
unavailable.
* To operate SIMPLINK, you should use
an High Speed HDMI cable with the CEC
(Consumer Electronics Control) function.
* SIMPLINK may not work properly if you a
third-party device that has an HDMI-CEC
function.
Activating and Using the
SIMPLINK menus
Press SlMPINKto access the SIMPLINK
menus.
2
Press the Navigation buttons to select to On.
3 Press the Navigation buttons to scroll to one of
the devices and press ENTER.
3
No:
@
@
@
@
@
Description
Displays the previously viewed TV channel.
Plays discs. When multiple discs are
available,the title of the disc appears at the
bottom of the screen.
Controls the connected VCR.
HDD recordings playback: Controls the
recording stored in HDD.
Audio out to home theater speaker or Audio
out to TV:
Changes
the audio output between
Home theater speaker and TV speaker.
-A check mark appears in front of the selected
device.
- Available devices display in a bright color.
- Unavailable devices display in grey.
Control the selected AV device.
Function Description
After connecting AV devices to
Direct Play the TV, you can directly control the
devices and play media without
additional settings.
Select AV Enables you to select one of the AV
device devices connected to the TV.
Control connected AV devices by
Disc
playback pressing the Navigation buttons,
ENTER, _, m, II, _ and _.
Power off alt When you power off the TV, all
devices connected devices are turned off.
When the equipment with
Sync Power SIMPLINK function connected HDMI
on terminal starts to ptay,the TV will
automatically turn
on.
Switch audio- Offers an easy way to switch audio-
out out.
@ NOTE
* If you change the input source by pressing
INPUT, the progressing function of the
SIMPLINK device will stop.
* If you select a device that has the
home theater feature, the sound output
automatically switches to the home theater
speaker and the TV speaker turns off.
* If a connected SIMPLINK home theater
system does not play the audio from the TV,
connect the DIGITAL AUDIO OUT terminal
on the rear of the TV to the DIGITAL AUDIO
IN terminal on the back of the SIMPLINK
device with an optical cable.