GE JP910 Owner's Manual page 12

Cleaningthe glass cooktop.
Cleanyour cooktopafter
each spill. Use CERAMA
BRYTE ® CeramicCooktop
Cleaner.
Normal Daily Use Cleaning
ONLY use CEIL_d'vL&_ B RYTE _'(;ermnic
Cooktop Cleaner on the glass cooktop.
Other creams ma_ not be as eflectixe.
To maintain and protect the stwli_ce _ff
your glass cooktop, tollow these steps:
[] Befin'e using the cooktop fin" the
fi_t time, clean it with CElLed'vIA
BRYTE ')Ceramic Cooktop Cleane_:
This helps protect the top and
makes cleanup easier
[] Daft} tlse of CEI)_/]_ BRYTE _:'
Ceramic Cooktop Cleaner will help
kee I) the cooktop looking new.
[] Shake the cleatfing cream well.
Appl) a fi_w drops of CEIL_dMA
BRYTE _ Ceramic Cooktop Cleaner
directly to the cooktop.
[] Use a p_}per towel or CEI_dVIA
BRYTE _"Cleaning Pad fin" Ceramic
Cooktops to clean the entire
c()()k[() I) StlYJ[ilce.
[] Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE: It is very important that you DO NOT
heat the cooktop until it has been cleaned
thoroughl_
Use a CERAMA BRYTE *_Cleaning
Pad for Ceramic Cooktops.
Burned-On Residue
WARNING: DAMAGE to your glass surface
may occur if you use scrub pads other than the
pad included with your cooktop.
[] Allow the cooktop to cool.
[] Spread a few drops of CEILAAMA
BRYTE _)(_eramic Cooktop Cleaner
on the entire burned residue area.
[]
Using the included CEIL_d'dA
BRYTE _> Cleaning Pad fi)r Ceramic
Cooktops, Iub the residue area,
ali))lxing, , pressure as needed.
[]
[]
If any residue remains, repeat the
steps listed above as needed.
For additional protection, after all
residue has been remoxed, polish
the entire stu'lhce with (;Elmira
BRYTE ') Ceramic Cooktop Cleaner
and a paper towel.
The CERAMA BRYTE *_Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts Cente_
See itTstructions under "To Order
Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
[] Allow the cooktop to cool.
[] Use a single-edge razor blade
scraper at approximately a 45 °
angle against the glass surlhce
and scrape the soil. It will be
necessary to apply pressure to
the razor scraper in order to
remove the residue.
[]
After scraping with the razor
scrape_; spread a few drops of
CElled'vIA BRYTE : Ceramic
Cooktop Cleaner on the entire
bm'ned residue area. Use the
CEI_dVIA BRYTE '_Cleaning Pad to
remove any remaining residue.
[]
For additional protection,
alter all residue has been
removed, polish the entire
surfilce with CEI_d_IA BRYTE ')
Ceramic Cooktop Cleaner
and a paper towel.
/2