Maintenance - Kenmore 625.385560 Owner's Manual

Premier reverse osmosis drinking water system
Hide thumbs Also See for 625.385560:
Table of Contents

Advertisement

PREFILTER/POSTFILTER
MAINTENANCE
NOTE: It is recommended
to replace
the battery,
prefilter
and postfilter
cartridges
at least every 6 months of prod-
uct water
use. Replace
more often if they begin to plug
with sediments.
The prefilter
and postfilter
are replaceable
sediment
car-
tridges
with activated
carbon
in its composition.
See
Figure 25. You must periodically
replace
the prefilter
and
postfilter
cartridge.
This will protect
the RO membrane
from being destroyed
by chlorine.
It will also prevent the
filters from plugging
with sediments.
You may notice a slower output
of product
water
as the
prefilter
and postfilter
build up with sediments.
Replace
the prefilter
and postfilter
cartridges
when this occurs. You
should replace
the battery
whenever
you replace
the car-
tridges.
RO MEMBRANE
CARTRIDGE
MAINTENANCE
The Reverse Osmosis cartridge
is a tightly
wound
special
membrane.
See Figure 25. The membrane
reduces the
dissolved
solids and organic
matter. The life of the
Reverse Osmosis membrane
cartridge
depends
mostly on
the pH and hardness of the supply water. (see specifica-
tions). Cartridge
life is shorter with higher pH. For exam-
ple, if supply water
pH is from 6.8 to Z7, the cartridge
may last for well over one year. However, cartridge
life
may be as short as 6 months if the pH is as high as 8.5 to
10. Higher
pH weakens
the cartridge
membrane
and
causes pin-hole
leaks. It's time to replace
the Reverse
Osmosis cartridge
when the production
rate and/or
quali-
ty of product
water
drops.
Product water
may begin to
taste different
or bad, indicating
solids and organics
are
passing through
the Reverse Osmosis membrane.
See
Reverse Osmosis cartridge
replacement.
REVERSE OSOMOSIS
CARTRIDGE REPLACEMENT
Complete
the following
steps to replace
the cartridges.
1. If possible,turn
off the water
supply to the RO system.
2. Remove (turn to the left) the pre filter cartridge
from
the filter head to relieve
pressure on the Reverse
Osmosis cartridge.
3. Remove the Reverse Osmosis cartridge.
4. Remove the postfilter
cartridge.
5. Discard the cartridges
in a proper
manner.
6. Install new cartridges
in reverse order (postfilter,
Reverse Osmosis and then prefilter).
Turn cartridges
to
the right to re-attach
to the filter
heads.
Z Remove and replace
the timer battery.
See Figure 29.
8. Turn on the water
supply to the RO system.
9. Purge the Reverse Osmosis membrane
cartridge.
See
page 17 for instructions.
Cover
Turn to the left
to remove
Postfilter
Cartridge
RO
Cartridge
Prefilter
Cartridge
Figure 25
PREFILTER/POSTFILTER
CARTRIDGE
REPLACEMENT
Complete
the following
steps to replace
the cartridges.
1. If possible,turn
off the water
supply to the RO system.
2. Remove the pre filter cartridge
(turn to the left) from
the filter head. Then remove the post filter cartridge.
3. Discard the cartridges
in a proper
manner.
4. Install new cartridges
in reverse order (postfilter
first,
then pre filter).
Turn cartridges
to the right to re-attach
to the filter
heads.
5. Remove and replace
the timer battery.
See Figure 29.
6. Turn on the water
supply to the RO system.
7. Purge the Reverse Osmosis membrane
cartridge.
See
page 17 for instructions.
Questions?
Call The Kenmore
Water
Line 1-800-426-9345
or visit KenmoreWater.com
2O

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite 625.385560

Table of Contents