Table of Contents
Advertisement
Quick Links
OWNER'S
MANUAL
MODEL NO.
625.384500
Caution:
Read and Follow
All Safety Rules,
Installation and
Operating
Instructions
Before First Use
of This Product.
If you have questions
when installing and us-
ing
your
water
filter
housing
call this toll-
free number...
1 - 800 -426-
9345
UNDERSINK
WATER FILTER
HOUSING
•
Safety Guides
•
Installation
•
Operation
•
Cartridge Replacement
•
Repair Parts
SAVE THIS MANUAL
I System tested and certified
by NSF International
to ANSI/NSF
Standard
42 for the reduction
of the
claims specified
on the performance
data sheet.
Sears, Roebuck and Co., Hoffrnan
Estates, IL 60179 USA
Advertisement
Table of Contents
Related Manuals for Kenmore 625.3845
Summary of Contents for Kenmore 625.3845
- Page 1 OWNER'S MANUAL MODEL NO. 625.384500 Caution: Read and Follow All Safety Rules, Installation and Operating Instructions Before First Use of This Product. If you have questions when installing and us- your water filter housing call this toll- free number... 1 - 800 -426- 9345 SAVE THIS MANUAL Sears, Roebuck and Co., Hoffrnan...
-
Page 2: Warranty
SAFETY GUIDES / SPECIFICATIONS • Please read this entire installing and using your undersink housing. Be sure to follow all guides carefully. Failure to follow them could personal injury or property damage. • Check with your local department for plumbing codes. - Page 3 Planning Installation Materials Needed Water Filter Housing Using Compression Using Soldered Using Threaded Installing Filter Filter Cartridge Life / Replacement Repair Parts Locate the water filter housing on the cold water the cold drinking water. Refer to the following TABLE OF CONTENTS 7 Typical Installation Drawings...
-
Page 4: Installations
PLANNING When planning your installation, below and on page 5 to guide you. There variables to consider as you plan. Some of these are: _" the water filter housing inlet and outlet threads are 3/8" NPT. _," existing plumbing type (copper, and nominal size (1/4",... -
Page 5: Installation
TYPICAL UNDERSINK TO S,NK FAUCET .oWo shutoff valve TO S NK FAUCET HOT H J_ _ __[] shutoff valve A. USING COMPRESSION Note: If plumbing with flexible port the filter housing in some mounting bracket (included) as shown 1. Apply several wraps of Teflon tape to the threads... - Page 6 6. Using ferrules and compression ten a length of tubing (allow some cold water pipe, to the filter head adaptor, FIG.4. 7. Cut tubing to the length needed slack, fasten tubing to the filter outlet sion adaptor, returning to the sink cold water as typically shown in FIG.
- Page 7 C. THREADED PIPE AND FITTINGS, MATERIALS TOOLS NEEDED: pipe instanation you will need pipe wrenches, tape or pipe joint compound, a union nipples. You may also need a pipe Connect the filter housing as typically 3, page 5. Observe the following: •...
-
Page 8: Filter Cartridge
Use the following information as a guide. no matter which type of cartridge will know it is time to replace it when tice the return of the unwanted water. Kenmore Undersink Water Filter 625.384500 with replacement been tested and certifiedby NSF International... -
Page 9: Filter Cartridge Replacement
FILTER CARTRIDGE REPLACEMENT CAUTION: Never remove pressure in the filter. 1. Close the nearest shutoffvalve ply pipe to the filter. To relieve pressure open the sink cold water faucet. 2. Turn the sump off of the _ter head, clockwise. Be careful, the sump is full of water. -
Page 10: Repair Parts
REPAIR Kenmore Undersink Water Filter Housing, Model No. 625.384500 PART NUMBER 7231296 Mounting Bracket (includes screws) 7156535 Head 42-34385 O-ring, 3-3/8" I.D. x 3-5/8" O.D. 7156577 Sump • 7228073 Owners Manual 4" 42-38478 Sediment Cartridge, 25 micron 42-38480 Sediment Cartridge, 5 micron 42-34370 Taste &... - Page 12 OWNERS MANUAL MODEL NO. 625.384500 The model number your water filter housing is found on the rating de- cal, on the filter sump. When requesting service or ordering parts, always provide the following in- formation: • Product Type • Model Number •...