Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung 403 User Manual

When the TV isinitially powered on, basic settings proceed automatically.
Connecting the power cord a nd antenna.
TV Rear Panel
::::::::::::::::::::::::::::::::::: ...... VHF/UHF Antenna
Cable
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERO button. Plug & Play is available only when the input source is set to TV.
Selecting a language Press the A or • button, then press the EN°'_ER _ button. POWER
................................ Select the desired OSD (On Screen Display) language.
volume in the OSD, press and hold MENU for 5 sec.
S Selecting an antenna Press the A or T button, then press the E_t°'_ERIZ_button. Select Air, Cable or Auto.
In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the _., T, _ or I_ button, then press the ENTERIZ_ button.
Selecting a Channel The channel search will start automatically.
For more information, refer to Channel _ Auto Program. (R 12)
_ Press the EN°'_ER _ button at any time to interrupt the memorization process.
Setting the Clock Set the Clock Mode automatically or manually.
Mode If you select the Auto, set the daylight saving time.
Select the time zone where you live.
Viewing the HD The connection method for the best HD screen quality is displayed.
...................................... Connection Guide
Enjoy your TV. Press the ENTER _ button.
If You Want to Reset This Feature...
1_ MENUFm _ Setup --_ Plug & Play --_ ENTERI:_
Ga_e Mode : Off
V-Chip
Melody : Medium
English 7