Maintenance Schedule; Maintenance - Craftsman 917.374550 Owner's Manual

MAINTENANCE
SCHEDULE
Check for Loose Fasteners
L Clean / Inspect Grass Catcher *
Check Tires
W Check Drive Wheels ***
Clean Lawn Mower ....
H Clean under Drive Cover ***
O Check Drive Belt/Pulleys ***
_ Check / Sharpen / Replace Blade
R Lubrtcation
Clean and Recharge Battery **
Check Engine Oil level
_ Change Engine Otl
Clean Air Fdter
Inspect Muffler
N Replace Spark Plug
E Replace Air Filter Paper Cartridge
Empty fuel system or add Stabilizer
BEFORE
EACH
USE
v'
v'
v'
AFTER
EACH
USE
v"
EVERY EVERY EVERY
10 25HOURS 100 BEFORE
HOURS ORSEASON HOURS STORAGE
v"
L/
v'3
i/
v'
v'
v_
* (ff so equipped)
** Electric-Start mowers
*** Power-Propelled mowers
**** Use a scraper
to clean under deck
i/
i/
i/
I/
1 - Change more often tf operating under a heavy load or in high outdoor temperatures.
2 - Service more often if operating in dtrty or dusty condtttons.
3 - Replace blades more often when mowing in sandy sotl.
4 - Charge 48 hours at end of season.
5 - And after each 5 hours of use.
GENERAL RECOMMENDATIONS
The warranty on this lawn mower does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator must
maintain unit as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your unit.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year, replace the spark
plug, clean or replace air filter element
and check blade for wear. A new spark
plug and clean/new air filter element
assure proper air-fuel mixture and help
your engine run better and last longer.
• Follow the maintenance schedule in this
manual.
BEFORE EACH USE
• Check engine oil level.
• Check for loose fasteners.
LUBRICATION
Keep unit well lubricated
(See "LUBRICATION CHART").
LUBRICATION CHART
(_ Wheel
adjuster (on
each wheel)
Engine oil
Mulcher
door hinge
pin
C) Rear door
hinge
(_ Handle bracket mounting pins
_ Spray lubricant
See "ENGINE" In Maintenance section.
IMPORTANT: Do not oil or grease plastic
wheel bearings. Viscous lubricants will
attractdustanddirtthatwillshortenthe lifeof
the self-lubricatingbearings. Ifyou feel they
must belubricated,use onlya dry,powdered
3graphite type lubricantsparingly.
1