Asus P8P67 DELUXE User Manual page 88

SPDIF Out Type [SPDIF]
[SPDIF]
[HDMI]
Renesas Electronics USB 3.0 [Enabled]
[Enabled]
[Disabled]
VIA 1394 [Enabled]
[Enabled]
[Disabled]
Marvell Storage Controller [Enabled]
Allows you to select the Marvell storage controller operating mode.
[Disabled]
[Enabled]
Marvell Storage OPROM [Enabled]
This item appears only when you set the previous item to [Enabled] and allows you to enable
or disable the OptionRom of the Marvell storage controller.
Configuration options: [Enabled] [Disabled]
JMB Storage Controller [Enabled]
Allows you to enable or disable the JMB storage controller.
Configuration options: [Disabled] [Enabled]
If you want to use the full functin of the JMB storage contorller (ex. AHCI), we recommend
that you set this item to [Enabled] and install the JMicron JMB36X Controller Driver from
the motherboard support DVD.
JMB Storage OPROM [Enabled]
This item appears only when you set the previous item to [Enabled] and allows you to enable
or disable the OptionRom of the JMB storage controller.
Configuration options: [Enabled] [Disabled]
Display OptionRom in POST [Enabled]
This item appears only when you set the JMB Storage OPROM item to [Enabled] and
allows you to display or hide the OptionRom of the JMB storage controller during POST.
Configuration options: [Enabled] [Disabled]
3-20
Sets to [SPDIF] for SPDIF audio output.
Sets to [HDMI] for HDMI audio output.
Enables the USB 3.0 controller.
Disables the controller.
Enables the onboard IEEE 1394a controller.
Disables the controller.
Disables the controller.
Set to [AHCI Mode] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the onboard
storage driver to enable advanced Serial ATA features that increases
storage performance on random workloads by allowing the drive to
internally optimize the order of commands.
Chapter 3: BIOS setup