Rental Playback; Auto Repeat Playback - Emerson CETD204 Owner's Manual

Make sure ...
•
TV/VCR/DVD's power must be turned on.
•
Insert a prerecorded tape.

RENTAL PLAYBACK

This function enables you to improve the picture
quality when playing back worn cassettes such as
rented tapes.
1
Select "USER'S SET UP"
Press the SETUP button on the
remote control.
Press the Arrow button K or L to
point to "USER'S SET UP".
Then press the ENTER button.
2
Set "RENTAL" to [ON]
Press the Arrow button K or L to
point to "RENTAL".
Press the ENTER button until [ON]
appears.
3
Exit the Rental setting
Press the SETUP button on the remote control to
return to the TV mode.
4
Start playback
Press the PLAY button to start playback. "RENTAL
PLAY B" appears.
•
Once you select the Rental mode, it stays in effect
even after you turn off the TV/VCR/DVD.
TO CANCEL THE RENTAL MODE
Repeat steps [1] to [2], select [OFF] using the
ENTER button on the remote control. Press the
SETUP button on the remote control to return to TV
mode.
If there is a power failure of any kind, the
TV/VCR/DVD will retain its memory for this fea-
ture.
SPECIAL PLAYBACK
The TV/VCR/DVD has the auto repeat function that
allows you to repeat a tape indefinitely without
touching the PLAY button.
TV/VCR
ALL REPEAT:
BLANK REPEAT
- TV/VCR SETUP -
TIMER PROGRAMMING
1
SETTING CLOCK
CHANNEL SET UP
B USER'S SET UP
V-CHIP SET UP
Press the SETUP button on the
LANGUAGE [ENGLISH]
CAPTION [OFF]
remote control.
ZERO RETURN
TIME SEARCH
INDEX SEARCH
Press the Arrow button K or L to
point to "USER'S SET UP".
Then press the ENTER button.
– USER'S SET UP –
2
B RENTAL [ON]
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
Press the Arrow button K or L to
VCR AUDIO [HIFI]
TV AUDIO [STEREO]
point to "REPEAT PLAY".
Press the ENTER button repeatedly
until your desired selection [ALL]
or [BLANK] appears.
3
Press the SETUP button on the remote control to
return to the TV mode.
4
Press the PLAY button to start the Repeat Play.
"REPEAT PLAY B" appears.
•
•
TO CANCEL THE REPEAT PLAY MODE
Repeat steps [1] to [2], select [OFF] using the
ENTER button on the remote control. Press the
SETUP button on the remote control to return to TV
mode.
If there is a power failure of any kind, the
TV/VCR/DVD will retain its memory for this fea-
ture.
- 27 -

AUTO REPEAT PLAYBACK

Repeat playback from the beginning
to the end of the tape.
: Repeat playback from the begin-
ning to a blank part, which is blank for more than
10 seconds.
Select "USER'S SET UP"
Select "ALL" or "BLANK"
Exit the Repeat Play setting
Start playback
Once you select the Repeat Play mode, it stays in
effect even after you turn off the TV/VCR/DVD.
If the Rental mode is set [ON], the "RENTAL
PLAY B" display has priority.
TV/VCR
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
B USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– USER'S SET UP –
RENTAL [OFF]
B REPEAT PLAY [ALL]
AUTO RETURN [OFF]
VCR AUDIO [HIFI]
TV AUDIO [STEREO]
EN
1C29