Connecting The Processor Fan Heat Sink Cable; Removing The Processor; Connecting The Processor Fan Heat Sink Cable To The Processor Fan Header - Intel D945GCPE - Desktop Board Motherboard Product Manual

Connecting the Processor Fan Heat Sink Cable

Connect the processor fan heat sink cable to the 4-pin processor fan header (see
Figure 12). A fan with a 4-pin connector as shown in Figure 12, A is recommended;
however, a fan with a 3-pin connector (Figure 12, B) can be used. Since the 3-pin fan
cannot use the onboard fan control, the fan will always operate at full speed.
Figure 12. Connecting the Processor Fan Heat Sink Cable to the

Removing the Processor

For instructions on how to remove the processor fan heat sink and processor, refer to
the processor installation manual or the Intel World Wide Web site at:
Integration of the Boxed Intel
Installing and Replacing Desktop Board Components
Processor Fan Header
Pentium 4 Processor in the 775-Land Package
® ®
31