Front Panel Usb Connectors; Connection Diagram For Front Panel Usb Connectors - Intel D915GLVG Specification

Intel Desktop Board D915GLVG Technical Product Specification
NOTE
The colors listed in Table 26 and Table 27 are suggested colors only. Actual LED colors are
product- or customer-specific.
2.8.2.4.4 Power Switch Connector [Red]
Pins 6 and 8 [Red] can be connected to a front panel momentary-contact power switch. The switch
must pull the SW_ON# pin to ground for at least 50 ms to signal the power supply to switch on or
off. (The time requirement is due to internal debounce circuitry on the board.) At least two
seconds must pass before the power supply will recognize another on/off signal.

2.8.3 Front Panel USB Connectors

Figure 18 is a connection diagram for the front panel USB connectors.
INTEGRATOR'S NOTES
•
The +5 V DC power on the USB connector is fused.
•
Pins 1, 3, 5, and 7 comprise one USB port.
•
Pins 2, 4, 6, and 8 comprise one USB port.
•
Use only a front panel USB connector that conforms to the USB 2.0 specification for high-
speed USB devices.
Figure 18. Connection Diagram for Front Panel USB Connectors
54
Power
(+5 V DC)
D−
One
USB
Port
D+
Ground
Key (no pin)
Power
1 2
(+5 V DC)
D−
3 4
D+
5 6
7 8
Ground
10
No Connect
One
USB
Port
OM15963