Bios Configuration Jumper Block; Location Of The Bios Configuration Jumper Block - Intel D410PT Specification

Technical Reference
2.3

BIOS Configuration Jumper Block

CAUTION
Do not move the jumper with the power on. Always turn off the power and unplug the
power cord from the computer before changing a jumper setting. Otherwise, the
board could be damaged.
Figure 13 shows the location of the jumper block. The jumper determines the BIOS
Setup program's mode. Table 23 lists the jumper settings for the three modes:
normal, configure, and recovery.
Figure 13. Location of the BIOS Configuration Jumper Block
49