Table of Contents
Advertisement
TRACK SEARCH
There are three ways to begin playback on an Audio
CD at a specific track.
Using the number buttons on the remote control
1
Press the number buttons to enter the
desired track number.
¡
Playback will start at the selected track.
¡
For single digit tracks (1-9), press a single number
(eg. track 3, hit [3]).
¡
To play track 26, hit [+10], [2], [6].
Using SEARCH MODE
1
Hit [SEARCH MODE].
¡
The Track search display appears.
2
Within 30 seconds, select a desired track
number using the number buttons.
¡
For single digits hit [0] first, if the total track of the
disc is more than 10.
¡
Playback will start at the selected track.
Using SKIP H / G
During playback, hit [SKIP G] to move the next
track. Hit it repeatedly to skip subsequent tracks. Hit
[SKIP H] to go back to beginning of the current
track. Hit it repeatedly to go to the previous tracks.
¡
If [SKIP H / G] is pressed while the playback is
paused, the playback will be paused again after skip-
ping to the next track.
NOTE:
¡
[SKIP H / G] are not operative when playback
is stopped.
TITLE / CHAPTER SEARCH
1
Hit [SEARCH MODE] once for the Chapter
search, twice for the Title search during
playback.
_/2
2
Enter the desired chapter/title number using
the number buttons.
¡
Playback will start at the selected chapter or title.
¡
Hit [CLEAR] to erase the incorrect input.
¡
For single digits hit [0] first, if the total chapter or
title of the disc is more than 10.
SEARCH FUNCTION
CD
¡
¡
¡
Use markers to memorize your favorite places on a
disc.
¡
¡
DVD-V
NOTES:
¡
¡
¡
– 22 –
TIME SEARCH
1
During playback, hit [SEARCH MODE] three
times (CD: twice) to display the Time Search
on the TV screen.
2
Within 30 seconds, enter a desired disc
time using the number buttons.
Playback will start at the specified time.
Hit [CLEAR] to erase the incorrect input.
When there is no need to enter a number, "0"
appears automatically. For example, " 0 : 0 - : - - "
appears in the Time Search display if the total time
of the track or title is less than 10 minutes.
MARKER SETUP SCREEN
1
Hit [SEARCH MODE] four times (CD: three
times) during playback.
The display screen and Markers will appear on the
TV screen.
2
Press [s / B] to select 1, 2, 3, 4, 5, 6, 7, 8, 9,
or 10 and ensure that " - - - - : - - : - - "
appears in the display.
3
When you reach the desired point, hit
[ENTER].
The title or track and elapsed playing time will
appear in the TV screen.
4
To return to the Marker later, hit [SEARCH
MODE] four times (CD: three times) during
playback and [s s / B B ] to choose the desired
marker, then hit [ENTER].
Opening the disc tray, turning off the power hitting
[SELECT], or selecting AC at step 2 and hitting
[ENTER] will erase all Markers.
To clear a marker, press [s s / B B ] to select a cursor
on to the marker number to be cleared and hit
[CLEAR].
You can mark up to 10 points.
5
Press [SEARCH MODE] or [RETURN] to
exit.
DVD-V
CD
DVD-V
CD
EN
Advertisement
Table of Contents
