ASROCK B75M R2.0 User Manual page 12

19. Users may prevent motherboard damages due to dampness by enabling
"Dehumidifier Function". When enabling Dehumidifier Function, the com-
puter will power on automatically to dehumidify the system after entering
S4/S5 state.
20. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the moth-
erboard functions properly and unplug the power cord, then plug it back
again. To improve heat dissipation, remember to spray thermal grease
between the CPU and the heatsink when you install the PC system.
21. Combo Cooler Option (C.C.O.) provides the flexible option to adopt three
different CPU cooler types, Socket LGA 775, LGA 1155 and LGA 1156.
Please be noticed that not all the 775 and 1156 CPU Fan can be used.
22. ASRock XFast RAM is not supported by Microsoft
®
64-bit. Intel Smart Connect Technology and Intel
supported by Microsoft
64-bit.
23. EuP stands for Energy Using Product, was a provision regulated by the
European Union to define the power consumption for the completed
system. According to EuP, the total AC power of the completed system
should be under 1.00W in off mode condition. To meet EuP standards,
an EuP ready motherboard and an EuP ready power supply are required.
According to Intel's suggestion, the EuP ready power supply must meet
the standard of 5v, and the standby power efficiency should be higher
than 50% under 100 mA current consumption. For EuP ready power sup-
ply selection, we recommend you to check with the power supply manu-
facturer for more details.
® ® TM
Windows Vista / Vista
12
® ®
Windows XP / XP
®
USB 3.0 ports are not
TM
64-bit / XP / XP