Internal Graphics Mode - Gigabyte GA-880GM-UD2H User Manual

CPU core 2
(Note)
Enables or disables CPU Core 2. (Default: Enabled)
CPU core 3
(Note)
Enables or disables CPU Core 3. (Default: Enabled)
IGX Configuration

Internal Graphics Mode

UMA Frame Buffer Size
x Surround View
Onboard VGA output connect
VGA Core Clock control
x VGA Core Clock(MHz)
hi : Move Enter: Select
F5: Previous Values
Internal Graphics Mode
Allows you to determine whether to allocate system memory for the onboard graphics controller.
Disabled
UMA
UMA Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics con-
troller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 128MB,
256MB, 512MB.
Surround View
Enables or disables the Surround View function. This option is configurable only if Init Display First is
set to PEG and an ATI graphics card is installed. (Default: Disabled)
Onboard VGA output connect
Specifies the graphics display of the onboard VGA output from the D-SUB/DVI-D or D-SUB/HDMI.
Auto
D-SUB/DVI
D-SUB/HDMI
VGA Core Clock control
Enables or disables the control of VGA Core clock. (Default: Auto)
VGA Core Clock(MHz)
Allows you to manually set the VGA Core clock. The adjustable range is from 200 MHz to 2000 MHz.
This item is configurable only if the VGA Core Clock control option is enabled.
(Note) This item appears only if you install a CPU that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Disables the onboard graphics controller.
Allocates memory for the onboard graphics controller from the system memory. (Default)
BIOS automatically determines the primary display port for output, depending on to
which port the display device is connected, D-SUB/DVI-D or D-SUB/HDMI. (Default)
Sets the D-SUB/DVI-D as the graphics display.
Sets the D-SUB/HDMI as the graphics display.
IGX Configuration
[UMA]
[Auto]
Disabled
[Auto]
[Auto]
500
F10: Save
- 39 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup