Onboard Serial Port 1
This function on the Integrated Peripherals menu allows you to select the
onboard serial port 1 function. Options are [3F8/IRQ4], [2E8/IRQ3],
[3E8/IRQ4], [Auto], and [Disabled]
OnChip PATA/SATA Device
Press
Enter
SATA Mode
LEGACY Mode Support
JMB362 SATA Controller
JMB363 SATA/PATA Controller
JMB363 Mode
SATA Mode
This is allows you set the onboard Serial SATA mode.
IDE: Use the Serial ATA hard disk drivers as Parallel ATA storage
devices.
RAID: Create a RAID 0, 1, 0+1, 5 and JBOD configuration
AHCI: Use the AHCI (Advanced Host Controller Interface) to enables
advanced SATA features for improved performance with NCQ and
Hot-plug features
LEGACY Mode Support
This function allows the SATA controller to operate in LEGACY mode.
Selected Disabled if you install operating system that support Native mode.
JMB362 SATA Controller
This function allows you to enable JMB362 SATA Controller for SATA port
6/7 control. The options are Auto, Enabled and Disabled.
JMB363 SATA/PATA Controller
This function allows you to enable JMB363 SATA Controller for IDE &
SATA port control. The options are Auto, Enabled and Disabled.
EVGA | 46
to display the OnChip PATA/SATA Device menu.
[
I
D
E
]
[Disabled]
[Auto]
[Auto]
[IDE]