Onboard Devices Configuration - Asus P5K SE EPU User Manual

Memory Remap Feature [Enabled]
Allows you to enabled or disable the remapping of the overlapped PCI
memory above the total physical memory. Enable this option only when you
install 64-bit operating system. Configuration options: [Disabled] [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot
device. Configuration options: [PCI/PEG] [PEG/PCI]
PEG Port Control [Auto]
Configuration options: [Auto] [Disabled]
PEG Force x1 [Disabled]
This item appears when the PEG Port Control item is set to [Auto].
Configuration options: [Enabled] [Disabled]
4.4.6

OnBoard Devices Configuration

Advanced
Onboard Device Configuraiton
High Definition Audio
Front Panel Type
Marvell IDE Controller
Onboard PCIE GbE LAN
LAN Option ROM
Serial Port1 Address
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
High Definition Audio [Enabled]
Allows you to enable or disable the High Definition Audio. The following item
appears only when you enable this item.
Configuration options: [Enabled] [Disabled]
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy
AC'97 or high-definition audio depending on the audio standard that the front
panel audio module supports. Configuration options: [AC97] [HD Audio]
Marvell IDE Controller [Enabled]
Allows you to disable or enable the onboard Marvell
Configuration options: [Enabled] [Disabled]
ASUS P5K SE/EPU
BIOS SETUP UTILITY
[Enabled]
[HD Audio]
[Enabled]
[Enabled]
[Disabled]
[3F8/IRQ4]
Enable or Disable
High Definition Audio
Controller
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
IDE controller.
®
4-23