Related Manuals for Electrolux EW 502 F
Summary of Contents for Electrolux EW 502 F
-
Page 1: Washing Machine
WASHING MACHINE MESIN BASUH E W 5 0 2 F USER MANUAL MANUAL PENGGUNA 35.292.874/1... -
Page 2: Table Of Contents
Contents Technical specifications Laundry weights Removing stains Warnings Detergents and additives Quantity of detergent to be used Disposal International wash code symbols 10 Tips for environmental protection 4 Maintenance Description of the appliance Bodywork Detergent dispenser drawer Detergent dispenser drawer Cleaning of the drainage area Water inlet filter Control panel... -
Page 3: Warnings
Warnings The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation • Leave the porthole door slightly ajar when the appliance is not in use. This preserves the door seal •... -
Page 4: Tips For Environmental Protection
Tips for environmental protection To save water, energy and to help protect the • With adequate pre-treatment, stains and limited soiling environment, we recommend that you follow these tips: can be removed; the laundry can then be washed at a lower temperature. -
Page 5: Use
Control panel 1. Programme chart 6. Temperature selector It will help you to choose the most suitable washing This control allows you to select the temperature of the programme for your laundry. washing cycle in accordance with the kind of clothes to be washed. -
Page 6: Operating Sequence
4. Select the temperature Operating sequence Turn the dial to the required setting. Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. -
Page 7: Washing Programmes
Programme table Washing programmes for cotton and linen Load: 5 kg Additional DESCRIPTION Programme Temp. Fabrics functions 40°-60° WHITES WITH PREWASH, for Prewash at 40°C HALF LOAD example work garments, sheets, Wash at 40°-60°C NO SPIN household linen, underwear, towels 4 rinses Spin 40°-60°... -
Page 8: Washing Programmes
Programme table Washing programmes for synthetics, mixed fabrics, delicates and wool Load: 2 kg, wool 1 kg Additional DESCRIPTION Programme Temp. Fabrics functions 30°-60° MIXED FABRICS WITH PREWASH, RINSE HOLD (*) Prewash at 30°C for example underwear, coloured Wash at 30°-60°C items, shirts, blouses 3 rinses Water drain... -
Page 9: Washing Hints
man’s pyjamas 500 g Washing hints blouse 100 g men’s underpants 100 g Sorting the laundry Removing stains Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Stubborn stains may not be removed by just water and Sort the laundry as follows: detergent. -
Page 10: Quantity Of Detergent To Be Used
The detergent and any additives must be placed in the Quantity of detergent to be used appropriate compartments of the dispenser drawer The type and quantity of detergent will depend on the before starting the wash programme. type of fabric, load size, degree of soiling and hardness If using concentrated powder or liquid detergents, a of the water used. -
Page 11: Maintenance
Maintenance 1. Bodywork 3. Cleaning of the drainage area Clean the outside of the machine with warm water and a The drainage area must be cleaned if the pump has neutral, non-abrasive household detergent. Rinse with been blocked with objects such as buttons, safety pins, clean water and dry with a soft cloth. -
Page 12: Water Inlet Filter
4. The water inlet hose filter If you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked. Turn off the water tap. Unscrew the hose from the tap. Clean the filter with a stiff brush. -
Page 13: Something Not Working
Something not working? Before contacting your local Service Force Centre, check your machine against the simple maintenance guidelines given below. Problem Possible cause • The machine does not start up: • The door is not firmly closed. • The machine is not plugged in or there is no power at the socket. -
Page 14: Installation
Installation Transit security bars Before starting the machine up, the transport security bars must be removed as follows: You are advised to keep all the transport security bars in case the appliance has to be transported again. 1. Unscrew and remove the 4. -
Page 15: Hydraulic Connection
Hydraulic connection Place the discharging hose in a washbasin or sink with the aid of the bent piece delivered separately. The bent piece has to be entered into the tube’s mouth in Connect the water inlet hose to a tap with a 3/4" order to assure the support. -
Page 16: Levelling
1,5 m. Max. IMPORTANT: The distance from the floor to the highest part of the hose should be between 60 to 90 cm. (It is advised to be between 60 and 70 cm). The hose must not be bent nor twisted to avoid clogging. Should a prolongation of the discharging hose be unavoidable this must never surpass 1.5 m and must be of the same diameter as the original hose. - Page 17 The Electrolux Group is the world‘s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners,chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.