Preparation For Use - Emerson NR101TT Owner's Manual

Unpacking And Set Up
• Carefully remove the unit from the display carton and remove all packing
material from the unit.
• The FM Antenna is built in the AC power cord. Unwind the AC power cord and
extend it to its full length for best FM reception.
• Note the Serial Number on the back panel of your system and write this Number
in the space provided on the Warranty page of this manual.
• Place the unit on a stable, level surface, convenient to an AC outlet, out of
direct sunlight, and away from sources of excess heat, dust, moisture, humidity,
or strong magnetic fields.
• Raise the lid to expose the phonograph. The phonograph has been secured
for shipment with a transit screw. Use a coin or screwdriver to turn the transit
screw clockwise. This will allow the turntable to "float".
NR101TT_072507.p65

PREPARATION FOR USE

4
4
TRANSIT SCREW
25/7/2007, 10:18