NETGEAR FE104 - Hub Installation Manual page 34

Installation Guide for the Model FE104 and Model FE108 Fast Ethernet Hubs
Table B-1. RJ-45 connector pinouts
Pin Normal (MDI-X)
1 Input Receive Data +
2 Input Receive Data -
3 Output Transmit Data +
6 Output Transmit Data -
4, 5, 7, 8 Internal termination, not used for data transmission
* Applicable to Port 4 on the Model FE104 hub and Port 8 on the Model FE108 hub, when the Normal/Uplink
push button is in the Uplink position.
B-2
Uplink (MDI) *
Output Transmit Data +
Output Transmit Data -
Input Receive Data +
Input Receive Data -
RJ-45 Connector Information